Sheet metal floors, welded to the floor itself; 18mm and 24mm plywood floors attached by screws.

I am interested

Polymer mud flap, with the purpose of not allowing mud and other objects to be projected onto other parts of the truck.

I am interested

Unmatched durability with excellent resistance to moisture and chemicals; fully wood-free; Thinner; Made of galvanized steel and PVC; Ecological and 100% recyclable; Great resistance to impacts

I am interested

Manual emergency coupling, with a red cap and manual service coupling, with a yellow cap.

I am interested

Lightweight product; Easier assembly and handling.

I am interested

Tarpaulin with the Randon brand.

I am interested

Polypropylene fire extinguisher box with rubber seal. 6 kg, 9 kg, and 12 kg models.

I am interested

G-bracket in steel and side hinge.

I am interested

Injected fender with anti-UV additive. Polypropylene material plus T20 filler; PR pigment. Right and left sides.

I am interested

Complete lighting and signaling Rear Led Lights for Randon semi-trailers.

I am interested

Polymer lantern, function of indicating the vehicle movements through light signals.

I am interested

Specially developed for lubricating hubs, wheels, bearings in automobiles, trucks, buses and agricultural equipment; Protection against continuous heavy loads and shock; Good resistance to water washing; Corrosion protection; Good shear stability; Excellent pumpability.

I am interested

Black water barrel with tap. 25 liters

I am interested

Rigid reflective sticker, for safety; Peeling resistant; Right and left options; Approved by Denatran; 300X50MM.

I am interested

Slack adjuster, made of nodular cast iron/low carbon steel, has the function of compensating the wear of the brake linings; Adjusts the clearance between lining and drum; fixed by pins, taper pins and elastic ring; Activates the brake through the air chamber; Keeps the brake regulated by gearing, other parts and pieces for trailers and semi-trailers.

I am interested

Z28 manual adjuster, made of cast iron, carbon steel and polymers, has the function of increasing the force supplied to the brake system; Coupled by a pin, and by gearing on the other side; Transforms the mechanical force generated by the actuator in angular momentum, transmitting it to the brake system, other parts or pieces for trailers and semi-trailers.

I am interested

Four models of shoes, several models of support foot and fixing plate with different heights, crank and connection tube sizes allow the use in diverse applications; Two operating speeds; Laminated spindle providing an easy operation and longer useful life; It has a Crank Extender as optional to increase the stroke, or an extended crank model; Standard mounting plate, offset (for special assemblies) and reinforced.

I am interested

Steel washer with the function of locking the nut, positioned between the castellated nut and the shaft spacing washer. The castellated nut is tightened and two tips are folded to make it impossible to turn the castellated nut.

I am interested

Steel washer with the function of providing spacing, positioned freely between two parts, pressure washers and others

I am interested

Compensates the height variation of the mechanical suspension’s drive shaft. The equalizer rotates freely, thus maintaining contact with both springs even with the height variation of the axles, other parts or pieces for trailers and semi-trailers.

I am interested

Machined, steel. Component used on the fifth wheel mounted on the tractor unit or the semi-trailer to lock the coupling system, other parts or pieces of the vehicles

I am interested

Tension arm bushing, steel/rubber. Its function is to make the coupling between parts and absorb vibrations; screwed joint, the adjacent parts are coupled and the vibrations are absorbed by the bushing's rubber.

I am interested

Brake/parking chamber made of steel, aluminum and polymers, has the function of applying the input force to the brake system, in the service and parking positions, fixed to the support in the brake system by a screwed joint, the service/parking actuator acts normally when in service, force is applied using a spring, other parts and pieces for trailers and semi-trailers.

I am interested

Hub, made of nodular cast iron. Its function is to serve as a base for fixing the drum and wheel; Bolted joint, cast and machined part to which the bearings are coupled and the drum and wheel are mounted, other parts and pieces for trailers and semi-trailers.

I am interested

Forged friction disc, made of steel, used both in road attachments and tractor vehicles. It is a means of fastening by a screwed joint, which suffers the wear of the fifth wheel coupling with the king pin, other parts or pieces of vehicles.

I am interested

Camshaft, low-carbon steel. Its function is to transmit torque from the brake adjuster to the pads, the latter touch the brake drum and reduce the speed of the vehicle. Wear bushings and elastic ring for retention; Bar for transmitting torque from the brake adjuster to the brake pads, other parts and pieces for trailers and semi-trailers.

I am interested

Only one in the market tested and approved for GCW over 74 ton; larger cargo capacity and availability of 2” and 1.5” pins; Larger coupling guide facilitates connection with the trailer end; Safety pin acts as a visual indicator of the locking condition; Uniform wear with the coupling pin that rotates 1/5 turn at each locking; Automotive e-coat paint; automatic coupling for applications on trailers, semi-trailers and combinations like road trains and dollies, for road or off-road use such as the sugar cane and forestry segment.

I am interested

New housing design: higher structural strength; fixation of the nut by an elastic pin; Minimizes the risk of theft; adjustment nut with 6 teeth; Easy of operation; Front lock; Forged locking pin, with laminated thread: Higher wear resistance; Automotive e-coat paint; Approved by Inmetro: PUC-DIF-0011-A; Complies with NBR 7475 standards.

I am interested

Roller fastener, made of carbon steel, has the function of fastening the brake bracket to the vehicle axle, to increase the rigidity of the system; Bolted joint, connecting and fastening element of the brake bracket to the axle, other parts and pieces for automotive brakes.

I am interested

Made of steel, component used on the fifth wheel mounted on the tractor unit or the semi-trailer to lock the coupling system, other parts or pieces of the vehicles

I am interested

The JOST Hubodometer controls the mileage of trailers and semi-trailers, independent from the tractor vehicle, allowing for a fleet maintenance program. Recording capacity of 1,000,000 km; fully sealed, filled with anti-fogging gas; records forward and reverse movement, tamper-proof; Components made of stainless materials; maintenance free; fixed directly to the axle hub cover, without the need to use cables or connections.

I am interested

Brake lining, made of binders, fibers, friction modifiers and mineral fillers. Its function is to provide friction for activating the brakes, friction takes place in the drums, reducing the kinetic energy and reducing the speed; Glued or riveted, when the brake is activated, the brake lining is compressed against the drum, reducing speed, other brake accessories free of asbestos.

I am interested

Spring steel springs, have the function of providing a return force to the brake shoes; pin coupling, when activated, the brakes cause the shoes to expand, which come into contact with the drum, to return to the starting position, the shoes need a force that is produced by this spring, other helical springs, other springs and spring leaves, made of iron or steel.

I am interested

Carbon steel brake shoe, has the function of applying torque to the brake drum; mechanical coupling by pins and rollers, platform to transmit power to the drum, other parts or pieces for trailers or semi-trailers.

I am interested

Steel pin with the function of attaching the rocker to the bracket, screwed; Allows the rocker to move on the bracket; self-tapping screws made of iron or steel.

I am interested

Made of forged and tempered material; 100% of the king pins are analyzed with ultrasound to ensure total safety; Self-locking screws specially developed for use with the kingpin; Coupling plates in forged, weldable steel, for 8 mm, 10 mm and 12 mm semi-trailer friction plates. Approved by Inmetro, European Union (TÜV) and CHAS (Argentina).

I am interested

Models Available: Fifth Wheel JSK 37C: Coupling for kingpin 2”; Fifth Wheel JSK 37CW: With polymer wear plates; Fifth Wheel JSK 37CXW: With polymer wear plates; Fifth Wheel JSK 37CX: Coupling for king pin 2”; More robust fifth-wheel block, Fifth Wheel JSK 39CS for semi-trailers: Coupling for kingpin 3.1/2”, has steel wear plates; Fifth Wheel JSK 39CS Air Release: With automated opening and coupling sensor; Fifth Wheel JSK 38C: Made of nodular cast iron; Fifth Wheel JSK 38G: Made of nodular cast iron;

I am interested

Turntable with 10 ton, 16 ton and 26 ton capacities. Corrosion-proof painting; larger contact area between the balls and raceway; 26 ton turntable with two ball bearing races. Applications: 10 ton turntable - recommended for road applications such as for self-steering axles on spaced-axle semi-trailers; 16 ton turntable - recommended for road and mixed/off-road applications, such as for sugar cane trailers; 26 ton turntable - Recommended for applications where road conditions are severe, requiring a higher load capacity, as in road train combinations for the sugar cane segment.

I am interested

Steel/polymer seal rings; Seal between hub and shaft, pressed/interference; Device that allows the hub to rotate but keeps the lubrication inside the system.

I am interested

Its function is to reduce the friction in parts with relative rotation and load resistance, pressed/interference; device that allows the rotation of parts with low friction.

I am interested

Cast iron brake drums; its function is to brake the vehicle; Screwed joint; the brake drum is mounted next to the hub and the wheel, suffering friction against the brake lining.

I am interested

Used in heavy vehicles for parts replacement.

I am interested

Part developed especially for the Aftermarket; Best cost-benefit in the market; Application for semi-trailers and trucks with stamped mechanical suspension

I am interested

Has the function of absorbing impacts with the ground; Rubber material.

I am interested

Suitable for all types of road equipment; Lighter and more resistant than steel wheels; Approved by INMETRO; Increased load capacity; Reduced tire wear; Greater fuel savings; Reduced brake maintenance; Vehicle aesthetics.

I am interested

Specially developed for attachments and heavy vehicles which run on asphalt roads with moderately abrasive ground on sloped, medium or long distance routes; Greater durability and resistance to impacts; Larger cargo capacity Certified by INMETRO.

I am interested

Nylon and fiber; Ample resistance to corrosion and wear; Facilitates cleaning and removal of debris; Greater durability, better finish and advanced design; Lightweight.

I am interested

Universal ratchet, buckle and hooks; Polyester strap.

I am interested

Specially developed for lubricating hubs, wheels and bearings in automobiles, trucks, buses and agricultural equipment; Protection against continuous heavy loads and shock; good resistance to water washing; Corrosion protection; Good shear stability; Excellent pumpability.

I am interested

7 Poles

I am interested

Suitable for all types of road equipment.

I am interested

Injected polypropylene fender; Hidden Support Bar; Lower weight; Composed of 20% virgin PP and 80% recycled PP.

I am interested

Tube eliminated; Acrylic Ecoat Painting; Flange with universal drilling, allowing it to be mounted with several semi-trailers brands.

I am interested

Rear lantern lenses for different applications.

I am interested

Right and left light, specially developed for the aftermarket.

I am interested

Polymer fender applied over the tires of Randon semi-trailers; Polypropylene; Composed of 30% virgin PP and 70% recycled PP.

I am interested

Cylinders designed to withstand severe applications with maximum performance and service life. Manufactured with quality raw material, they undergo rigorous production processes that guarantee the best surface finish; Guide rings that allow greater stability of the guiding assembly; Trustworthy seals, resistance and easy maintenance; Easy quality control of the chrome plating process; Practical design, few moving parts, reducing breakage and leakage points.

I am interested

Same technology, strength and quality already recognized by the market with the authentic Randon Ecoplate II. The ECO II Black panels are interchangeable, lightweight and 3.5 times more durable than marine plywood. The new polymer compound has recycled polymer in its composition, providing the same characteristics and a more competitive cost.

I am interested